|
All of Power Meter 
.jpg)
|
CPM-50 : Multifunction Power Meter
■FEATURE
- The CPM series Multifunction Power Meter provide high accuracy measurement,display and communication (Modbus RTU)of all electrical and power quality parameters,including harmonic measurement up to 31st THD(Total Harmonic distortion)or Individual harmonic.
-
- They also have digital inputs and outputs and interface with versatile functions such as remote control,alarm,statistics and records.
|

|
MDM3100 : Multifunction Power Meter
- LCD display
- measure over 60 parameters
- 2 RS485 port,Modbus RTU communication
- dual energy pulse output
- harmonic analysis (optional),up to 63th
- 8 ch digital remote signal (optional)
- 4 ch programable analog output (optional)
- 4 ch relay output (optional)
- profibus communication (optional)
- ethernet networking communication(optional)
- data memory (optional)
- various installation method
|
.jpg)
|
WLMPH : watt/watthour(var/varhour)
 |
Accuracy 0.25% F.S.±1digit |
 |
Programmable rate 0 to 19999 digit(rate),0 to 999999999 digit(totalizer) |
 |
Programmable scale factor (0.0001 to 99999.9999)(totalizer) |
 |
Dielectric strength 2KVac/1min(input/output/power) |
 |
surage test 4KV (1.2X50us) |
 |
Dual alarm function (Optional) |
 |
Digit RS-485 interface function (Optional) |
 |
Digit pulse output function (Optional) |
 |
CE EMC certification |
|
.jpg)
|
WLMMX-P1: (V,A,W,VA,PF,Hz Single phase)
 |
Accuracy 0.25% F.S.±1digit (ACA/ACV/WATT/VA) |
 |
Measuring ACA/ACV/Frequency/WATT(power factor or Apparent power ) |
 |
ACA/ACV/WATT for Ture RMS) |
 |
ACA/WATT decimal point can be modifed |
 |
CT rate can be modifed(1 to 999) |
 |
Dielectric strength 2KVac/1min(input/output/power) |
 |
Surage test 4KV (1.2X50us) |
 |
Digit RS-485 interface function (Optional) |
 |
CE EMC certification |
|
.jpg)
|
DW9E 3 : phase power meter
TOKY DW9A/B/C/D/E series 3 Phase Coulometer with follow features:
1) To measure: voltage, current, active power, reactive power, power factor, frequency, Kwh, 4 quadrant energy, etc. Total 28 electrical parameters;
2) 3 lines 4 digit LED to show the above value. For DW9E model, additional 1 line 8 digit to show the KWH separately;
3) Two On-Off input / output, with remote control and measure function;
4) Isolation between input and output signal;
5) True effective value measuring;
6) Two alarm output for voltage, current, power factor, active power, reactive power;
7) Transformed analog output 4-20mA for voltage, current, active power, reactive power, frequency, power factor;
8) With RS485 communication function (Modbus RTU protocol);
9) With power down memory function for KWH / KvarH.
|
.jpg)
|
DW8 : digital watt meter ( V, A, W, kwH, PF )
TOKY DW8 series single phase coulometer with follow Features:
1) To measure true effective value (for AC signal);
2) To measure voltage, current, power factor, active power, reactive power, appearant power and Kwh;
3) Two relay alarm output, alarm value set freely;
4) Some model with 4-20mA analog current output;
5) Some model with RS485 communication function.
|
.jpg)
|
DP3I-W : digital watt meter (W) |
 |
MMP-1 : Multifunction power meter
 |
Accuracy 0.25% F.S.±1digit |
 |
Programmable rate 0 to 19999 digit(rate),0 to 999999999 digit(totalizer) |
 |
Programmable scale factor (0.0001 to 99999.9999)(totalizer) |
 |
Dielectric strength 2KVac/1min(input/output/power) |
 |
surage test 4KV (1.2X50us) |
 |
Dual alarm function (Optional) |
 |
Digit RS-485 interface function (Optional) |
 |
Digit pulse output function (Optional) |
 |
CE EMC certification |
|
.jpg) |
MMX-D Series: DC MULTI-POWER METER
 |
Accuracy 0.05% F.S.±1digitit |
 |
Measuring and display DCV/DCA/W(KW)/WH(KWH) |
 |
Auto range (DC0~99.99V/0~600.0V) for voltage input function |
 |
Programmable rate 0 to 9999 digit (DCA/W(KW),0 to 99999999 digit (WH(KWH) |
 |
Digit RS-485 interface function)(optional) |
 |
Protection class NEMA4/IP64 |
 |
CE EMC certification |
|
 |
WLMMP-2 Series : Multi-Function Power Meter
|
 |
MMP Series : Watt, Var, Power Factor, Phase Angel Meter
 |
Accuracy 0.25% F.S.±1digit |
 |
Measuring watt/var/power factor/phase angle |
 |
Programmable rate 0 to ±19999 digit |
 |
Dielectric strength 2KVac/1min(input/output/power) |
 |
Surage test 4KV (1.2X50us) |
 |
Dual alarm function (Optional) |
 |
15 bit DAC analog output function (Optional) |
 |
Digit RS-485 interface function (Optional) |
 |
CE EMC certification |
|
 |
AXE-1 Series
|
Accuracy±0.1%F.S.
|
|
Measuring and display ACV/ACA/Watt/VA/Frequency/Power factor /KWH/KWH time |
|
ACV/ACA/Watt for ture RMS |
|
ACA/Watt/VA/KWH/KWH time auto-range function |
|
Over current (>15A) and over temperature(>65°C)auto-protector function |
|
Large bright whiteLEDs high 16.3mm(1.146") |
|
Impuse test Meet requirement of IEC 60950-1 6KV/3VA combination wave test |
 |
Surge test (ring wave)2.5KV(0.25ms/1MHz))(IEC255-4) |
|
 |
AXE-2 Series |
 |
DW9L Series: Multi-Function Powermeter |
.jpg) |
MMS-P Series: Single phase powermeter |
.jpg) |
CPM-20 Series: Muti-Function Power meter
The CPM-20 series Multifunction Power Meter provide high accuracy measurement, display and communication(Modbus RTU) of all electrical and power quality parameters, including harmonic measurement THD(Total Harmonic distortion) Provides electricity bill ratio (Cost) and carbon dioxide ratio (Co2) set can show cumulative electricity bills and carbon emissions, and suitable for the installation in the power management of remote communication, such as the use of demand.
|
 |
MFM383A Series: Multi-Function Power meter
- R.M.S. Voltage & Current
- Active, Reactive & Apparent Power
- Active energy
- Programmable CT / PT
|
 |
MFM384 Series: Multi-Function Power meter
• 3 Ø (True rms) Voltage
• 3 Ø (True rms) Current
• 3 Ø Power (Active, Reactive, Apparent)
• 3 Ø Power Factor
• Energy (Active, Reactive, Apparent)
• Frequency
• Programmable CT/PT Primary/Secondary
• Single pulse output
• Modbus RTU communication (RS485) (optional)
|
 |
DR9 Series: Power Recoder
1. ER9 power recorder is used to measure and record true value of 3 phase voltage , ampere , active power , reactive power , power factor , Kwh , KvarH ect. It also can generates all kinds of forms .
2. Datasheet record can be passed to PC to store or analysis through USB connection and SD card.
3. With RS485 communication port and RS232 modbus RTU.
4. It is widly used in SCADA system and energy management system , power station automation system , power grid monitor , estate power monitor , industrial automation system , intelligent switchboard , switch cabinet.
|
 |
AEM Series: Power Meter Module
- Provide high accuracy measurement, display and remote
- communication of single phase & three phase parameters (V, A, P, Q, S,PF, Hz, Kwh). Multi-circuit design and relay output modular expansion design decrease the overall cost and make the functionality more flexible. All monitored data is available via a RS485 serial ,for the needs in energy management, alarming, and remote controlling. Embedded flash memory for Data-Logging can avoid any data missing once the communication is interrupted.
- Moreover, its ultra compact size DIN-rail mounting makes itself mountable in virtually any panel, enclosure or indoor Cabinet.
|
 |
CPM-70 Series : Multi-Function Power meter |
|
|
|
|
|
Power Meter
AEM Series: Power meter module 
DR9 Series: Power recoder 
CPM-20 Series Muti-function Power meter 
MDM 3100 series 
DW9L Series: Multi-Function Powermeter
CPM-70 Series
MFM384 Series: Multi-Function Power Meter
MFM383A Series: Multi-Function Power Meter
MMS-P Series: Single phase power meter
AXE-2
AXE-1
WLMMP-2 Series
MMX-D : DC MULTI-POWER METER 
CPM-50 Multifunction Power Meter 
WLMMP series
WLMMX_P1 
DW9E 3 phase power meter 
WLMPH -series ,watt/watthour(var/varhour) 
DP72 Digital Power Factor Meter
Multi-function Power Analyzer :YD3000
YD2200 INTELLIGENCE ELECTRIC POWER METER 
DW9- Three Phase digital Power Meter ( V, A, W, kwH, PF,Hz )
DW8 Single Phase
DP3I-W digital watt meter (W)
DW8 digital watt meter ( V, A, W, kwH, PF )
|
|